MK Electronics Ltd.
Japanese site
Site Map
Privacy Policy
Company info MK News Products information Request of catalogues and documents Support Inquiry



Products information
 
  MKS200
MKS725S
MKS504S
MKS100L
MKS50X
MKS630V
MKHT630
ROTARY ADAPTOR
MGS series
MKHC series
MKEN-40
MKT-1

  ZKC-325/325T/325C/325CT
ZKC-200/200C
ZKC-25/25T/25C/25CT
ZKC-325W/325WT
ZKC-325H
ZKC-25T-W1
ZKC-25ENL
ZKC-25M/MT
ZKC-325V/VT/VF/VFT
ZKC-325VFT-004/
ZKC-325VT-009

ZKC-25S/ST
ZKC-16/16T/16A/16AT
ZKF-25
ZKF-30
ZKF-51N/ZFR-51N
ZSE-25/25H
ZSE-200H
ZKR-20
ZKC Series Specification

  CAS OP-7
HK-005
HK-006/007/008
DR series
DR30
MS300/MS600/MS1000
DS-001B/Y
DRUM ROLLER
ZKR-1316
KH-450/600/ KHF300/350/420/515
KR-700/KRF-700/
KRH-500/600/700

  ITS-10HS
ZKS-12
CS60
US2015
US2300 / US2300SD
RS2400
MIRA340
ST・MAC series

  ZKS-110
ZKS-100

  MASTER ACE
HPS-3S/13S/13S-TB

DH-1B
STC-220
EC65
MC40
AC25T/AC100

  ITH-15S
MKVH-50
MS2000/MS4000
MS7000

  LC100
DIN rail cutter
CUT-P12/P20/P20T/
P30/P30T/P45

  C300A
C370A
C371A
C373A
C377A
C378
C385A

  Measurment equipment of
coil winding DMT-108
  Measurment equipment of toroidal coil winding DMT-208
  ABISOFIX
  ISOREX
  PORTABLE FIX MHP30/MHP35P
  MKEN-5S/MKEN80
  FINOFIX
  Insert type Stripper M27G
  TWIN CONE STRIPPER M88G
  Twin wheel Stripper M14BJ
  HAND WIRE STRIPPER MKWSN

  Air cushioning material making machine PACO140

MK News

Request of catalogues and documents
 
Inquiry by E-mail
 

Z FEED
ZKF-51N / ZFR-51N (flange for ZKF-51N)

Feeding machine for large size material
For special shaft (Build to order),

special flange (Build to order), please contact us.

EX. Deformed shaft, particular kind of flange.


General catalog download



1. Sent out from both side and sending speed is adjustable. (slow to high speed)
2. Jog function for easy setting of materials: check test feeding and performance
3. Have plenty of room to mount, handle to 50kg
4. You can choose sensing method (below) for various materials.
(1) Contacting materials: detect feeding situation of materials by sensor arm.
(2) Non-contacting materials: detect feeding situation of materials by sensor stand(available in option).
5. From 200V to 240V is available in build to order.



All models of Digital Cutter Series >>
Cut & Stripper ZKS-100>>



・Special Shaft (Build to order)
・Special flange (Build to order)



MODEL
ZKF-51N / ZFR51N
Drive shaft rotation speed
[RPM]
10 - 100
Direction of drive shaft rotation
CW/CCW (with switch)
Material feeding direction
right and left (right before shipping)
Swing arm work force
[g]
250(vertical direction, and arm horizontal)
Material weight capacity
[kg]
50
Capacity of diameter and width
Φ700 or less and width 265 or less
Drive shaft of diameter
Φ30
Power Source
AC100V 8A
External Dimension *
450W×590D×1163H(main body)
920W×590D×1163H(main body with sensor arm)
Weight
[kg]
34(ZKF-51N) / 8(ZFR-51N)
* Not including any objection
◎ZFR-51N out diameter width φ591, possible to change from φ132~380 in setting arm .




Switching button

Front panel

Image of feeding

Image of connecting feeder
You can feed from various directions by changing swing arm positio.
(1)The stop position.:
When swing arm come to this position, the rotation of spool is stop.
(2)Low gear sensor position:
When material pulled up, swing arm move to this position, rotating by low speed.
(3)High gear sensor position:
When material pulled up, swing arm move to this position, rotating by high speed.
(4)Abnormal stop sensor position:
When material pulled up, swing arm move to this position, being abnormal stopped.
* These sensor positions are able to tune in exactly when install swing arm.


FLANGE FOR ZKF-51Nby INTELOCK TRIPLE ARMED ADJUSTING SYSTEM
ZFR-51P EX. Setting material



MODEL
FLANGE FOR ZKF-51N by INTELOCK TRIPLE ARMED ADJUSTING SYSTEM
Maximum Diameter
Φ500mm
Maximum Width
Φ190mm
Minimum Diameter
Φ210mm
Minimum Width
Φ330mm


Contact us

Please wait for the form to appear.

If the form does not appear after a while、Please contact here

Return to the top of page

Copyright © MK Electronics Ltd. All Rights Reserved.