MK Electronics Ltd.
Japanese site
Site Map
Privacy Policy
Company info MK News Products information Request of catalogues and documents Support Inquiry



Products information
 
  MKS200
MKS725S
MKS504S
MKS100L
MKS50X
MKS630V
MKHT630
ROTARY ADAPTOR
MGS series
MKHC series
MKEN-40
MKT-1

  ZKC-325/325T/325C/325CT
ZKC-200/200C
ZKC-25/25T/25C/25CT
ZKC-325W/325WT
ZKC-325H
ZKC-25T-W1
ZKC-25ENL
ZKC-25M/MT
ZKC-325V/VT/VF/VFT
ZKC-325VFT-004/
ZKC-325VT-009

ZKC-25S/ST
ZKC-16/16T/16A/16AT
ZKF-25
ZKF-30
ZKF-51N/ZFR-51N
ZSE-25/25H
ZSE-200H
ZKR-20
ZKC Series Specification

  CAS OP-7
HK-005
HK-006/007/008
DR series
DR30
MS300/MS600/MS1000
DS-001B/Y
DRUM ROLLER
ZKR-1316
KH-450/600/ KHF300/350/420/515
KR-700/KRF-700/
KRH-500/600/700

  ITS-10HS
ZKS-12
CS60
US2015
US2300 / US2300SD
RS2400
MIRA340
ST・MAC series

  ZKS-110
ZKS-100

  MASTER ACE
HPS-3S/13S/13S-TB

DH-1B
STC-220
EC65
MC40
AC25T/AC100

  ITH-15S
MKVH-50
MS2000/MS4000
MS7000

  LC100
DIN rail cutter
CUT-P12/P20/P20T/
P30/P30T/P45

  C300A
C370A
C371A
C373A
C377A
C378
C385A

  Measurment equipment of
coil winding DMT-108
  Measurment equipment of toroidal coil winding DMT-208
  ABISOFIX
  ISOREX
  PORTABLE FIX MHP30/MHP35P
  MKEN-5S/MKEN80
  FINOFIX
  Insert type Stripper M27G
  TWIN CONE STRIPPER M88G
  Twin wheel Stripper M14BJ
  HAND WIRE STRIPPER MKWSN

  Air cushioning material making machine PACO140

MK News

Request of catalogues and documents
 
Inquiry by E-mail
 
End production
DIGITAL CUTTER
for FLAT CABLE


ZKC-25ST (Thin Blade)
ZKC-25S (Shear Blade)



Special cutting machine for flat cable with ZKC-25 standard type




General catalog download



1. An on-board sensor
2. In addition to a usage as a standard type of ZKC-25, you can choose suitable cutting way for flat cable on the LED touch panel.
3. Interlock cover and finger guard makes more safety.
4. It’s possible to change Shear Blade Type and Thin Blade Type even after a purchase
5. Power source is from 100V to 240V.
Usage of mark type (flat cable) and standard type
Decision screen is appeared when turn on power to the machine, select either mark type (cutting flat cable) or standard type. When you choose standard type, it appears the same screen as ZKC-25/25T, and operation is same as well. Choosing mark type, it goes using sensor and work as 2 kinds of cutting mode.

Sensor and Slitter
When you use slitter, please dropping off, broaden out part of non-fusion (between small cable to small cable).
Sensor above slitter will detect between part of fusion and non-fusion.
Cutting mode of mark type
2 kinds of cutting mode, MODE O and MODE F
MODE O
When sensor detects part of fusion, it cuts from top of fusion up to position you set up.。
You can set the length 4 points, 2 points from first fusion point, 2 points from second fusion point.
MODE F
To measure parts of fusion, it cuts half in length.



 MODEL
ZKC-25S / 25ST
Type
Type: mark cut
Type: standard cut
Material feeding speed *1
100-600 mm/sec
Cutting length
0.1~99999.9
Number of cutting operation
1~999999
Repeatable cutting accuracy *2
±0.2
Maximum width of cutting material
10~100
0~100
Maximum thickness of cutting material
1.5
20
Outside input and output terminal
Cutting force(0.5mm above blade edge)
1.28kN(128kgf)
Processing ability


length 10mm 120 length100mm 93
length1000mm 24
Power Source
AC100V2A~AC240V1A
External Dimension
516W / 306D / 387H
Weight
30kg
※1 Feeding speed is different depend on materials.
※2 Calculated value by motor output
※3 Some cannot be cut depending on its material
※4 Not including any objection




Up shot of sensor

Easy operation by LED touch panel


Contact us

Please wait for the form to appear.

If the form does not appear after a while、Please contact here

Return to the top of page

Copyright © MK Electronics Ltd. All Rights Reserved.