MK Electronics Ltd.
Japanese site
Site Map
Privacy Policy
Company info MK News Products information Request of catalogues and documents Support Inquiry



Products information
 
  MKS200
MKS725S
MKS504S
MKS100L
MKS50X
MKS630V
MKHT630
ROTARY ADAPTOR
MGS series
MKHC series
MKEN-40
MKT-1

  ZKC-325/325T/325C/325CT
ZKC-200/200C
ZKC-25/25T/25C/25CT
ZKC-325W/325WT
ZKC-325H
ZKC-25T-W1
ZKC-25ENL
ZKC-25M/MT
ZKC-325V/VT/VF/VFT
ZKC-325VFT-004/
ZKC-325VT-009

ZKC-25S/ST
ZKC-16/16T/16A/16AT
ZKF-25
ZKF-30
ZKF-51N/ZFR-51N
ZSE-25/25H
ZSE-200H
ZKR-20
ZKC Series Specification

  CAS OP-7
HK-005
HK-006/007/008
DR series
DR30
MS300/MS600/MS1000
DS-001B/Y
DRUM ROLLER
ZKR-1316
KH-450/600/ KHF300/350/420/515
KR-700/KRF-700/
KRH-500/600/700

  ITS-10HS
ZKS-12
CS60
US2015
US2300 / US2300SD
RS2400
MIRA340
ST・MAC series

  ZKS-110
ZKS-100

  MASTER ACE
HPS-3S/13S/13S-TB

DH-1B
STC-220
EC65
MC40
AC25T/AC100

  ITH-15S
MKVH-50
MS2000/MS4000
MS7000

  LC100
DIN rail cutter
CUT-P12/P20/P20T/
P30/P30T/P45

  C300A
C370A
C371A
C373A
C377A
C378
C385A

  Measurment equipment of
coil winding DMT-108
  Measurment equipment of toroidal coil winding DMT-208
  ABISOFIX
  ISOREX
  PORTABLE FIX MHP30/MHP35P
  MKEN-5S/MKEN80
  FINOFIX
  Insert type Stripper M27G
  TWIN CONE STRIPPER M88G
  Twin wheel Stripper M14BJ
  HAND WIRE STRIPPER MKWSN

  Air cushioning material making machine PACO140

MK News

Request of catalogues and documents
 
Inquiry by E-mail
 
End production
DIGITAL CUTTER MARK SENSOR TYPE

ZKC-25M (Shear Blade)
ZKC-25MT (Thin Blade)

Detecting mark and cut the materials very accurate


General catalog download



1. Detecting mark, cutting materials very accurately.
2. Various cutting mode
3. Wide range of cutting materials (please choose among: reflecting sensor for surface/ reverse surface and transmission type sensor)
4. Sensor detection range is adjusted easily by auto tuning system
5. Interlock with PC is available in option, electric output is 100V~240V as standard.
●Flat cable
●Insulating paper with mark
●Film
●Name plate
●Tape wire

It can cut off materials that has gap and mark that detectable by reflected and transparent sensor. Various materials are also able to cut. For more detail please inquire to us.

Flat cable

Insulating tube with mark



Upper roller :ZRU25
Down roller :ZRS25
Cutter Blade  :ZHU25
Fixing Blade :ZHS25
Thin blade (10pcs/set) :ZHT25
Thin blade receiver(10pcs/set):ZHM25
Thin blade holder:ZUT25

*Changing from ZKC-25M → ZKC25MT You need to use ZUT25, ZHT25, and ZHM25.



 MODEL
ZKC-25M/25MT
Material feeding speed *1
[mm/s]
100~500
Cutting length steps
0.1
Cutting length
0.1~99999.9
Number of cutting operation
1~999999
Repeatable cutting accuracy *2
±0.2
Maximum width of cutting material *3
100 (depending order of specification)
Maximum thickness of cutting material *3
20(depending order of specification)
Outside input and output terminal
Cutting force(0.5mm above blade edge)
1.28kN(128kgf)
Power Source
AC100V2A~AC240V1A
External Dimension
516W / 306D / 387H
Weight
[kg]
30
Data Capacity
10 Items
※1 Feeding speed is different depend on materials.
※2 Calculated value by motor output
※3 Some cannot be cut depending on its material
※4 Not including any objection







Up shot of sensor

Easy operation by LED touch panel


Contact us

Please wait for the form to appear.

If the form does not appear after a while、Please contact here

Return to the top of page

Copyright © MK Electronics Ltd. All Rights Reserved.