MK Electronics Ltd.
Japanese site
Site Map
Privacy Policy
Company info MK News Products information Request of catalogues and documents Support Inquiry



Products information
 
  MKS200
MKS725S
MKS504S
MKS100L
MKS50X
MKS630V
MKHT630
ROTARY ADAPTOR
MGS series
MKHC series
MKEN-40
MKT-1

  ZKC-325/325T/325C/325CT
ZKC-200/200C
ZKC-25/25T/25C/25CT
ZKC-325W/325WT
ZKC-325H
ZKC-25T-W1
ZKC-25ENL
ZKC-25M/MT
ZKC-325V/VT/VF/VFT
ZKC-325VFT-004/
ZKC-325VT-009

ZKC-25S/ST
ZKC-16/16T/16A/16AT
ZKF-25
ZKF-30
ZKF-51N/ZFR-51N
ZSE-25/25H
ZSE-200H
ZKR-20
ZKC Series Specification

  CAS OP-7
HK-005
HK-006/007/008
DR series
DR30
MS300/MS600/MS1000
DS-001B/Y
DRUM ROLLER
ZKR-1316
KH-450/600/ KHF300/350/420/515
KR-700/KRF-700/
KRH-500/600/700

  ITS-10HS
ZKS-12
CS60
US2015
US2300 / US2300SD
RS2400
MIRA340
ST・MAC series

  ZKS-110
ZKS-100

  MASTER ACE
HPS-3S/13S/13S-TB

DH-1B
STC-220
EC65
MC40
AC25T/AC100

  ITH-15S
MKVH-50
MS2000/MS4000
MS7000

  LC100
DIN rail cutter
CUT-P12/P20/P20T/
P30/P30T/P45

  C300A
C370A
C371A
C373A
C377A
C378
C385A

  Measurment equipment of
coil winding DMT-108
  Measurment equipment of toroidal coil winding DMT-208
  ABISOFIX
  ISOREX
  PORTABLE FIX MHP30/MHP35P
  MKEN-5S/MKEN80
  FINOFIX
  Insert type Stripper M27G
  TWIN CONE STRIPPER M88G
  Twin wheel Stripper M14BJ
  HAND WIRE STRIPPER MKWSN

  Air cushioning material making machine PACO140

MK News

Request of catalogues and documents
 
Inquiry by E-mail
 

Measurement equipment of
coil winding

DMT-108

Type DMT-108 is automaticly display on digital monitor turns and polarity of coils instantly and accuratly.
Machine is good for various air core coils (relays, solenoids, transformer, morter and power generator of field coil)
The sensor will be selecteld depending on the shape and size of the coil.


General catalog download



1. Up to 60,000 volumes, a height of 850mm coil can be measured
2. Measurement accuracy is within ±0.2%(maximum error)
3. No need of any adjustment or calibration
4. Measurement results displays on LED by microprocessor

DMT-108 designed for Motor/Power Generation/Transformer/Induction coil/Ignition coil for car/Relay/Solenoids/HP transformer/etc.
To Operate

1. Put your coil into probe on torque stand
2. Clip starting and ending of coil by measurement
*no need of putting coil data or comparing coils




Adapted materials



Machine Model
DMT-108
Measurable coil
see below on torque stand
Measurement coverage of coil turns
0~60000 turns
Accuracy
0~300 turns ±0 turns
300~500 turns ±0~1 turns
above 500~60,000 turns within ±0.2%
Measurements speed
0.6 sec./cycl
External Dimension*
W 355 × D 345 × H 125
Weight
[kg]
6
*Not including any objection.

Specification of torque stand
torque stand Model
A
B
C
D
E
Inside Diameter
within 4
within 6
within 10
within 10
within 10
Height
within 150
within 150
within 250
within 350
within 550
Eternal Diameter*
W 75 X D 85 X H 95
Weight
[kg]
2.5
*Not including any objection.

・Power Source AC 24V, 50Hz/60Hz(stepdown transformer 100V~24V is attached)
・Measurement environment→temperature:5-40 degree Humidity: within 85%
・custom made to order is available(Inside Diameter over 2mm, Height within 550mm)
・Specification will be changed in some case
・DMT 108 is not be abled to work in such condition:electromagnetic, noise


Height of torque stand ( unit:mm ) from the left 150, 250, 350, 550




Contact us

Please wait for the form to appear.

If the form does not appear after a while、Please contact here

Return to the top of page

Copyright © MK Electronics Ltd. All Rights Reserved.